低温チラーの過冷却はどうなるのか?
As we all know, the 低温チラー is a kind of professional refrigeration design widely used in industry. Although it can provide an effective cryogenic environment, there are some abnormal phenomena in over-refrigeration. Usually, the lowest temperature of the 低温チラー can only reach – 40 degrees. The main reason is limited by the limit operating conditions of single-stage piston compressor. If the evaporator temperature of the chiller is too low, the following problems will arise when it exceeds the limit operating conditions.
もし 低温チラー is excessively refrigerated, it will have a great impact on the use function of the 低温チラー product itself. The actual compression process deviates from the equal compression process to a great extent. The compressor gas transmission coefficient of the chiller decreases, and the compressor gas transmission capacity will be greatly reduced. This is very disadvantageous to the service life of the 低温チラー products.
If the 低温チラー is over-refrigerated for a long time, the influence on the compressor inside the 低温チラー can not be ignored. When the compressor is over refrigerated, the exhaust temperature of the compressor is too high, and the lubricating oil on the cylinder surface of the compressor becomes thinner, which makes the lubricating condition worse. It may even cause the carbonization of lubricating oil, the phenomenon of cylinder pulling and the improper sealing of valve plates.
関連推奨品
-
液冷式エネルギー貯蔵キャビネット・チラーの冷却システム
1142新エネルギー技術の発展に伴い、新エネルギー、太陽光発電、電気エネルギーステーションにおけるコンテナ型エネルギー貯蔵システムの応用が増加している。もし蓄電池パックの温度が低ければ、蓄電池パックの温度は上昇する。
詳細を見る -
5P冷温水機設置手順書
1049The 5P hot and cold water machine is used in various industries and is used for cold treatment. So what problems do you need during installation and maintenance? If the 5P hot and cold water unit refrigeration compressor unit does not have vibrati...
詳細を見る -
Rapid temperature change test chamber temperature control instructions
1101The selection of the humidity range of the rapid temperature change test chamber should be noted that the corresponding temperature range should be indicated after the humidity index or the dew point temperature should be given. Because relative h...
詳細を見る -
工業用冷水機の一般的な故障のトラブルシューティング
1241As we all know, with the rapid development of modern industrial technology, in order to improve production efficiency, improve product quality and reduce consumption costs, the demand for temperature control equipment in the process is higher and ...
詳細を見る