LNEYA工業用冷凍機 メーカー サプライヤー
ニュース
工業用グリコール温度サイクル機のコンプレッサー故障の修理方法
The industrial glycol temperature machine performs refrigeration and heating reactions under the required process conditions, and the compressor is used as its core accessory. If a fault occurs, the operator should pay attention to summarizing and analyzing the problem. 1. The industrial glycol temperature machine is divided into two parts: heating part and cooling part, which are widely used in chemical industry, reaction kettle and other industries. It can realize mutual switching, speed ...
詳細を見る
Introduction to the quality and configuration of industrial refrigeration and heating circulators
With the development and progress of society, industrial refrigeration and heating circulators are used more in the industry, and the technological level is becoming more and more complex. So, what should users pay attention to after purchasing this equipment? 1. In order to consume electricity, many companies will cut off the power after the experiment. According to the technical staff, we explained that if the industrial refrigeration and heating circulator is powered off in winter, the inn...
詳細を見る
空冷式および水冷式サーキュレーターの冷却および加熱方法
The cooling heating circulator is controlled by high and low temperature during operation. After the user runs at high temperature and low temperature, it can be heated with heat transfer oil, which is water-cooled and air-cooled. 1. It belongs to electronic equipment. It should be cleaned, dusted, and energized regularly to prevent the components from being damaged by moisture. Partial inspection and performance inspection should be carried out regularly to understand their technical statu...
詳細を見る
500リットルの冷却・加熱温度制御機器に求められる要件とは？
The 500-liter reaction kettle cooling and heating temperature control equipment is a dynamic temperature control system, a fully closed circulation pipeline, which can be automatically heated or cooled according to the process requirements. 1. A series of exothermic and endothermic reactions will occur during the polymerization reaction of the 500-liter reactor with cooling, heating and temperature-controlling equipment. 2. It can control one or more reactors at the same time. It is a large s...
詳細を見る異なる構成の高圧反応器による高温-低温制御システム
Different configurations of high pressure reactors, the quality of products brought by different manufacturers is not the same, but the points of attention are the same, you need to pay attention to it. 1. To be used at the designated location and follow the instructions for use. Check the test pressure, operating pressure, operating temperature and other conditions engraved on the main container, and use it within the allowable range of conditions. 2. The high-pressure reactor is a precision...
詳細を見る
Analysis of the work and industry application of the chiller
Although there are many different types of chillers, most use the same cooling principle. An important part of the process is the coolant or refrigerant, which holds more heat than water and helps maintain an efficient cooling process. Heat is removed from the coolant and released into the air. The concept of a cooler is based on the principle that cooling involves removing heat from a process and releasing it into the air. All chillers have condensers, compressors, expansion valves and evapo...
詳細を見る
産業用加熱サーキュレーターはどこで役立つのか？
The industrial heating circulator can provide a circulation device of cold source and heat source, and has a wide working range. It is used in the pharmaceutical, chemical, biological and other industries to provide heat and cold sources for reactors, tanks, etc., and can also be used for heating and cooling of other equipment. 1. Due to the heating and cooling effect of the industrial heating circulator, the material temperature can be kept constant (heating and cooling) during the producti...
詳細を見る
About the components of the reactor chiller refrigeration heating circulator
The reactor chiller refrigeration and heating circulator is used to control the heater and cooler, adjust the temperature, and maintain the stable temperature of the material. Through the circulating medium, the temperature of the material can be quickly controlled to further improve the efficiency of the product, so that it can be transported to the cooling equipment normally. Refrigerant, and can make the refrigerant form a continuous circulation loop in the system, so as to reduce the temp...
詳細を見る
What are the applications of steam circulators in chemical industry?
The steam circulator in the chemical industry is a temperature control equipment in the pharmaceutical and chemical industry. When users operate, they need to understand the performance and maintenance knowledge in order to operate the equipment effectively. 1. It can be heated and cooled quickly, can move up and down continuously, and has a wide temperature control range. It does not need to replace the heat transfer medium in the whole process, and reduces the consumption of heat transfer m...
詳細を見る
TCU統合温度制御ユニットの高圧アラームの原因
When the TCU integrated temperature control unit is used, it needs to be used according to the instructions in detail. Once problems are encountered, they need to be dealt with in time. Generally speaking, if we encounter a high pressure alarm from the compressor, then we need to carefully analyze various reasons. The reasons include more refrigerant filling, poor condensation effect, electrical failure and many other reasons. So, how should it be handled? 1. There is a lot of refrigerant fi...
詳細を見る
