Is the choice of a centrifugal pump or a volumetric pump in a pharmaceutical laboratory?
Performance:
In order to be able to select the type of pump that is suitable in the pharmaceutical laboratory, it is necessary to have a deep understanding of its performance and understand the difference in its specific working principle. To this end, we must understand that the centrifugal pump is dependent on the pressure (or The variable flow phenomenon of the indenter, while the positive displacement pump has a more or less constant flow phenomenon independent of the pressure.
Viscosity:
The centrifugal pump and the positive displacement pump are also different in viscosity, and the flow rate drops when the viscosity rises, and the positive displacement pump actually causes an increase in the flow rate. This is because the higher viscosity liquid fills the voids in the volumetric pump, resulting in higher volumetric efficiency.
Efficiency:
In pharmaceutical laboratories, it is necessary to consider the effect of pressure on the equipment. After all, different pumps have different characteristics. Different efficiencies will increase the pressure of the pump. For volumetric pumps, as the pressure increases, Efficiency will actually increase, and centrifugal pumps have a better efficiency point. On both sides of this point, the overall pump efficiency will drop significantly.
Entrance conditions:
The pharmaceutical laboratory has different conditions for the inlets of these two types of pumps. The centrifugal pump needs to reserve a certain amount of liquid in the pump to form a pressure difference. The liquid-free dry pump cannot be started by itself, due to the volume. The pump agitates the liquid by the expansion and contraction of the liquid volume, and the negative pressure is formed at the inlet, so the volumetric pump can initiate the perfusion. In some cases, this is the decision whether to choose the volumetric pump or the centrifugal pump. Elements.

The selection of different pumps in the pharmaceutical laboratory is to be selected according to their own needs. It takes a lot of time to get the right choice to get a higher benefit.
関連推奨品
-
Minimum 40 degree refrigerator use precautions
1129The temperature of the lower 40 degree refrigerator is indoor temperature: 5-32 °C, relative humidity 80%/22 °C, the distance from the ground > 10cm, the altitude below 2000m, the safe environment guarantees a smoother operation of the lower 40...
詳細を見る -
Design and Test Technology of High Temperature Environmental Chamber Sales
12461. Temperature selection (1) The climatic zones of the region; Whether the product is exposed to the solar radiation environment near the heating device; Surrounding air, solar radiation and ways of heat transfer from heating devices to products;...
詳細を見る -
How to Make Ultra Low Temperature Recirculating Chillers More Energy-saving
1068現代では、環境保護と省エネが開発テーマであり、工業用冷凍機も同様である。では、工業用チラーをより省エネにするにはどうすればいいのでしょうか?まず、工業用冷凍機の配管スケールを防止・低減する。
詳細を見る -
100L high and low temperature thermostat installation instructions
840The 100L high and low temperature thermostat uses coolant as the transmission medium to transfer the heat generated by other instruments or equipment that need to be cooled, and dissipate the heat to the outside of the equipment through the refrig...
詳細を見る