半導体冷凍温度制御テーブルクーラー操作説明書
The power supply switching of the control system of the transformer cooling system of the semiconductor refrigeration temperature control station uses the imported dual power automatic switching device. Its main function is automatic switching between the active and standby working power sources. When the common power failure occurs, it automatically switches to the standby power supply. When both power supplies are normal, the common power supply works and the standby power supply is in standby state. The semiconductor refrigeration temperature control station programmable controller (PLC) is the control center of the execution part of the strong oil air cooler control device. It receives various status signals from the transformer to control the execution part.
When the transformer of the semiconductor refrigeration temperature control console is put into operation, a group of coolers will be put into operation, that is, the working group cooler is operated. The auxiliary cooler is controlled according to the oil surface temperature of the transformer, the winding temperature, the load signal, etc., and the auxiliary cooler can be activated as follows. The cooling method of the semiconductor refrigeration temperature control transformer is forced oil circulation air cooling, and at least one group of coolers should be operated after the transformer is put into operation. The control box of the semiconductor refrigeration temperature control station is controlled by intelligent equipment, and the cooling device for controlling the transformer is mainly controlled by a main switch such as a change switch on the control panel.

The structure and operation description of the semiconductor refrigeration temperature control station are as shown above. When the user operates the semiconductor refrigeration temperature control station, the operating efficiency of each component is ensured as much as possible, so that the overall operating efficiency of the semiconductor refrigeration temperature control station can be improved.
関連推奨品
-
Core Maintenance Points of Ten High and Low Temperature Test Chamber Manufacturers
1067According to many years’ production experience of high and low temperature test chamber in Wuxi Guanya, it is found that many users are not very familiar with the maintenance of high and low temperature test chamber. As one of the top ten manufact...
詳細を見る -
Closed laboratory circulator enameled mixing tanks refrigeration and heating system
860Closed laboratory enameled mixing tanks refrigeration and heating system
詳細を見る -
チップバーンイン試験におけるVCSELとは?温度による影響は?
1542VCSELの正式名称はVertical-cavity Surface-emitting Laserで、中国名は垂直共振器面発光レーザー。半導体レーザーの一種です。半導体レーザーは、半導体製造技術を用いて製造されるレーザーです。
詳細を見る -
高温・低温交互湿式ヒートショック試験ボックスの機能説明
914消費者は高温・低温交互湿式ヒートショック試験機の性能に注目する必要がある。LNEYAのテストチャンバーは購買企業のニーズに近い。高温・低温交互ヒートショック試験機...
詳細を見る