How to solve the fault of the ultra-low temperature refrigerator pressure controller?
If the industrial ultra-low temperature refrigerator encounters a controller-related failure during operation, if it is not resolved in time, the pressure controller may be unavailable.
The pressure controller plays a very important role in the ultra-low temperature refrigerator group. Because of the pressure exerted between each accessory under the high-efficiency working state, the range is different.
In order to reduce the impact of pressure on the ultra-low temperature refrigerator group, the company should regularly check the pressure controller carefully. Only careful inspection can ensure that the equipment operates within a stable and safe pressure range, and the pressure is stable. The problem will be reduced accordingly.
So, where is the pressure controller? The pressure control unit is installed in different positions and there will be different pressures. The range of settings is different, and the effect on the ultra-low temperature refrigerator group is also different. The principle of high pressure and low pressure is different, and the scope of protection for intelligent ultra-low temperature refrigerators is also different. In actual use, there may be excessive pressure, or the pressure is too small. Naturally, there are some internal causes. If you let it develop, it will have a bad influence on the machinery. At this time, the equipment will be It will be a self-protection method by powering off. By reducing this gap, you can try to make the equipment less problematic and the life will increase accordingly. Therefore, it needs to operate within a very safe pressure range. The technology will run steadily.
For ultra-low temperature refrigerator users, the company should ask technicians to train these personnel to let them know the maintenance expertise, what should be checked, and which conditions should be taken care of.
If the relevant configuration of the ultra-low temperature refrigerator is relatively high, the pressure controller failure is relatively small, so it is recommended to choose a reliable manufacturer to purchase.

関連推奨品
-
高温・低温サイクル機の冷媒選択について
1119In the operation of high and low temperature cycle machines, the presence of refrigerant is essential, and the environmentally friendly mixed refrigerant used by LNEYA is better in terms of performance. The high and low temperature cycle machine h...
詳細を見る -
Minimum 40 degree refrigerator use precautions
1131The temperature of the lower 40 degree refrigerator is indoor temperature: 5-32 °C, relative humidity 80%/22 °C, the distance from the ground > 10cm, the altitude below 2000m, the safe environment guarantees a smoother operation of the lower 40...
詳細を見る -
Operation and Maintenance of Small Water Chiller Units
9402. Air-cooled module internal filter, in order to better filter impurities in the water system, the protective plate heat exchanger is generally more than 40 meshes, that is to say, its filter is more dense and finer than other brands. The advanta...
詳細を見る -
直接接触式液冷とコールドプレート式液冷技術の違い
1238コールドプレート液冷技術は、加熱部品の熱を、コールドプレートを介して、循環パイプラインに封入された冷却液に間接的に伝達し、その熱を冷却する実施方法である。
詳細を見る