Description of Selection of Air-cooled Cryogenic Chiller
Many users struggle with the problems of air-cooled cryogenic chillers and water cooled cryogenic chillers. However, enterprises should make choices according to their actual environment. For this reason, Wuxi Guanya professional manufacturer has sorted out the selection instructions of relevant air cooled cryogenic chillers.
Air-cooled cryogenic chiller, different from the water-cooled cryogenic chiller, covers a small area. For enterprises with a small area, the air-cooled cryogenic chiller is of great advantage, which is a benefit of the air-cooled cryogenic chiller. As there is no need to use the water cooling system, the air-cooled cryogenic chiller can greatly reduce the floor area in the enterprise. For the enterprise with a small floor area, the air-cooled 極低温冷凍機 is absolutely a good choice.
Second, due to the use of different types of compressor, the common air-cooled cryogenic chiller on the market may be air-cooled screw machine, which is not a completely sealed closed cryogenic chiller. It can be air-cooled or water-cooled. In addition to having no water cooling system, the use effect of the air-cooled screw machine has no difference with other cold machines. But as mentioned above, it is not completely sealed, while the air cooling cryogenic chiller is an airtight case board cryogenic chiller, which is a kind of high-level cryogenic chiller. Relatively speaking, the air-cooled cryogenic chiller seems to be a good choice!
Therefore, according to their own environment size, operation requirements, operation costs to the overall consideration, Wuxi Guanya air-cooled cryogenic chiller can be a good choice for companies!
関連推奨品
-
高温・低温循環タンク冷凍プロセスの説明
1376高温・低温循環タンクを使用する過程で、不適切な使用による些細な問題が発生する可能性があり、無錫官也高温・低温循環タンクの冷凍工程に問題が発生する可能性があり、その後、...
詳細を見る -
Causes and troubleshooting of low-temperature water chillers for photoetching machines
897The operator of the low-temperature chiller for lithography machine can have a certain understanding of the related faults and solutions during the operation of the equipment, so as to better use the low-temperature chiller for lithography machine...
詳細を見る -
クーラーが詰まる原因は何ですか?
990LNEYAチラークーラーHRT全体のシステムは、容器の膨張、容器の膨張と液体循環は断熱であり、液体循環に参加しない、唯一の機械的な接続と閉じた液体循環システムです。
詳細を見る -
循環式冷凍機の機器故障アラームの対処法
1269循環式冷凍機の使用中に故障やアラームが発生した場合、どうすればいいのでしょうか?生産性を確保するためには、このような問題を迅速に解決する必要があります。私たちはまず、故障やアラームの原因を理解し、さまざまな対処法を採用する必要があります。
詳細を見る