原子炉はどこで使用されるのか?原子炉の温度制御システムは?
Generally, non professionals should be confused about the reactor.
The reactor is composed of reactor body, reactor cover, jacket, agitator, transmission device, shaft seal device, support, etc. It is generally understood as a container with physical or chemical reactions. Through the structural design and parameter configuration of the container, the functions of heating and mixing, hydrolysis, neutralization, distillation, evaporation, crystallization, storage, hydrogenation, alkylation, polymerization, constant temperature reaction, cooling and low and high speed mixing required by the process can be realized.
The application scope and scenario of the reactor mainly include the following eight areas: 1. Food agriculture; 2. University test; 3. Biochemical pharmacy; 4. Gold refining industry; 5. Scientific experiments; 6. Bioengineering; 7. Industrial factory; 8. New material industry.
The temperature control of the reaction kettle is divided into two types: rising temperature and cooling temperature (depending on whether the inside is exothermic reaction or endothermic). Steam, molten salt or other heating media are used for heating, while cooling is generally cooling water or other media. Whether heating or cooling, heating or cooling media flow control is used, manually open and close the valve, or use automatic control to control heating The control valve of cooling medium regulates the flow to control.
The whole liquid circulation is a totally closed system.
1. Speed block for temperature rising and cooling, controlling chemical reaction system
2. The heat conduction medium will not absorb water vapor at low temperature
3. The heat conduction medium will not be oxidized, discolored, or browning
No oil mist is generated at high temperature.
4. Thermodynamic changes of the fast response system, whether it is a severe endothermic or exothermic reaction, will not have temperature control hysteresis.
5. A heat conduction medium can be used for low temperature and high temperature, and can be used in the temperature range of – 120 ℃ – 350 ℃.
関連推奨品
-
循環式冷凍機の冷媒は何ですか?
1051再循環冷凍機の冷凍温度は業界によって異なるため、選択する冷媒も異なる。再循環チラーを選ぶ際には、冷媒の種類や冷媒の種類を明確に理解することも必要です。
詳細を見る -
実験室における超低温フリーザーの一般的なトラブルシューティング方法
10861.電源がオンになった後、主電源の空気スイッチが自動的に切断される:冷凍システムのコンプレッサーが破損しているかどうかを確認し、破損している場合は部品を交換する。交換した後、コンプレッサーを交換する。
詳細を見る -
Suitable Freezer Manufacturer
915For enterprise users, choosing a suitable freezer manufacturer is very important and must be carefully treated. Wuxi Guanya Refrigeration technology co., Ltd, as a professional freezer manufacturer, is committed to producing all kinds of low tempe...
詳細を見る -
ワークピースの冷凍に使用される工業用冷蔵庫はどのようなモデルですか?
994ワーク・フリーザーとは-工業用冷間収縮組立技術-延命、金属冷間処理とは、金属または合金のワークをある種の媒体に入れ、適切な温度まで加熱し、この温度で一定時間保持することである。
詳細を見る