Energy-efficient high and low temperature circulation box description
With the efficient development of the pharmaceutical and chemical industry, environmental pollution is also the subject of more attention. To this end, LNEYA actively responds to environmental protection, produces energy-efficient and high-temperature circulating boxes, and saves enterprise costs as much as possible.
The high and low temperature circulation box group reduces the condensation temperature under the premise of evaporation temperature. In order to meet the safety and production requirements of the equipment, the evaporation temperature is lowered to reduce the condensation temperature, so as to ensure the cooling water efficiency and increase the transformation. Adjust the reasonable operation of the chiller equipment. When the equipment is safely operated, the cooling unit operates at 70%-80% load ratio and runs at 100% load, and the power consumption per unit of cooling capacity is smaller. In this way, it is necessary to combine the operation of the water pump and the cooling tower.

Prevent and reduce pipe fouling to improve the heat exchange efficiency of the condenser and evaporator. Replenish water If the water treatment is not good, calcium carbonate and magnesium carbonate produced by the heating of calcium bicarbonate and magnesium bicarbonate will deposit on the pipeline. Decreasing the thermal conductivity, affecting the heat exchange efficiency of the condenser and the evaporator, and greatly increasing the electricity cost of the equipment. In addition to the water treatment technology, it is also possible to use the pipeline automatic cleaning equipment for pipeline cleaning. The high-low temperature cycle box group refrigerator frequency conversion device adjusts the speed of the centrifugal refrigerator compressor. After the low-pressure refrigerant passes through the centrifuge, the pressure rises. The higher the speed of the centrifuge, the higher the pressure rises. In actual operation, most of the equipment is running at a non-full load. A fixed-speed centrifuge wastes energy when the equipment is running at a small load. The variable frequency centrifugal chiller can automatically adjust the compressor speed according to the change of the load, and the energy saving space is relatively large.
These operating instructions can help the high and low temperature circulation box to be more energy efficient and use as much energy consumption as possible.
関連推奨品
-
超低温ベアリング冷却装置 シュリンクフィットベアリングとブッシングとピン
1352冶金業界では、精密工作機械の油圧システムは、工作機械が正常に動作できるように油膜粘度を安定させるために油温を制御するために冷凍機を使用する必要があります。鉄鋼製品に適用する場合、...
詳細を見る -
高温・低温液体循環式冷凍機の氷詰まりに対応する小型クーラー
825高温および低温の液体循環式冷凍機の運転において、氷詰まりは比較的よく見られる故障です。関連メーカーの経験に基づき、氷詰まりに対処するためのヒントを特別にまとめました。配管内の...
詳細を見る -
電源管理チップ温度試験システムを購入するには?
1232パワー・マネージメント・チップ温度テスト・システムは、異なる温度環境における半導体チップの性能と信頼性をテストするために使用される重要な装置である。この種の試験装置を購入する際には、...
詳細を見る -
低温冷却ユニット-120度の冷却効果は信頼できますか?
1128LNEYAは、一流体極低温冷却ユニットの生産に特化し、冷却温度範囲は-150度から-5度であり、異なる冷却温度の要件を満たすことができます。LNEYAの製品は、低温から高温まで幅広く使用されています。
詳細を見る