化学冷凍・加熱循環システム使用上の注意事項
In chemical production, the reaction will generate heat, which will cause the heat to be uneven. If it is not discharged in time, it will increase the temperature in the kettle and cause danger. The existing heating system of the reactor is relatively simple, and the process of reducing the temperature in the reactor to room temperature takes a particularly long time, and the heat energy cannot be used rationally, resulting in a waste of some resources. However, if the waste heat is released too much, the overall temperature will drop unstable, and the product quality will be affected. Therefore, it is very important to have a cooling and heating cycle system.

The characteristic of the reactor is that the volume and heat capacity are very large, and endothermic and exothermic reactions can occur at any time, so the entire process time will be lengthened when collecting. When the polymerization reaction occurs in the reactor, the chemical raw materials are changing, which will cause changes in the process and materials, and a series of endothermic and exothermic reactions occur. Therefore, the chemical production itself is very complicated.
Points for attention in the use of chemical refrigeration and heating cycle systems
(1) When the reactor is in operation, it needs to strictly follow the relevant standards to prevent over-temperature and over-pressure.
(2) Strict temperature control in accordance with requirements.
(3) It is necessary to prevent the superposition of temperature difference stress and internal pressure stress to ensure that the equipment does not appear to be strained.
(4) The ratio of ingredients must be strictly controlled to prevent violent reactions.
With the rapid development of society, in order to adapt to the current development needs of the chemical industry, it is necessary to strengthen temperature control in the chemical production process and optimize the design of the temperature control system to ensure that it meets the requirements for use and ensures the normal operation of the equipment.
関連推奨品
-
エンジン・パワートレインの冷却システムのファン故障のトラブルシューティング
980ファンは一般的にエンジン・パワートレインの冷却システムの上端に取り付けられるが、規制に従って側面に取り付けることを選択する顧客もいる。ファンを使って放熱するスクリュー・チラーの場合は、エア・クーラーと呼ばれる。
詳細を見る -
Common faults of plate heat exchangers in new energy vehicle inspection
1385The reason for the excessive pressure drop of the new energy vehicle detection is that the running system pipeline is not properly purged, especially in the newly installed system pipeline, many dirt (such as welding slag) enters the interior of t...
詳細を見る -
耐圧防爆型超低温冷蔵庫の内部漏れに関する注意事項
12781.音漏れ検知方法まず、防爆型超低温冷蔵庫の冷凍配管を窒素で満たす。次に聴診器で内部をチェックする。ある場所で音漏れが聞こえたら、その場所に印をつける。車...
詳細を見る -
LNEYA工業用冷凍庫アクセサリーの性能を知るためにあなたを取る
756温度コントローラー 温度コントローラーは、本機の制御や保護に使用します。温度が設定値に達すると、スイッチが自動的に回路を遮断(またはオン)します。当社の製品では、温度制御はしばしば...
詳細を見る