低温産業における冷凍性能の低下と冷媒の関係
The effect of the refrigeration system of the low-temperature industrial refrigerator is directly related to the refrigerant. Once the refrigerant leaks, the cooling capacity will be insufficient, so that the suction and exhaust pressures are relatively low, and the expansion valve and the evaporator are in operation. The balance pressure cannot be maintained. Therefore, if the refrigerant leaks from the low-temperature industrial refrigerator (group) is found, it is not rushed to fill the system with the refrigerant. Instead, the leak point should be immediately found and the refrigerant should be filled after repair.
In the refrigeration system of the low-temperature industrial refrigerator (group), pay attention to the amount of refrigerant, too little, too much, too much, too much may cause the exhaust pressure of the low-temperature industrial refrigerator to rise, higher than the normal value, need to stop in time, use High pressure exhaust removes excess refrigerant from the system.
If the low-temperature industrial refrigerator (group) is filled with too much refrigerant after maintenance, the cooling effect will be worse, because the charge of the refrigerant will occupy a part of the condenser of the low-temperature industrial refrigerator (group), which is reduced. The cooling area and cooling efficiency are also decreasing, and the cooling rate is continuously decreasing. Therefore, according to the operation sequence, after the machine is shut down for a few minutes, excess refrigerant is released at the high pressure shut-off valve, and the residual air in the system can be released at the same time.
Of course, the refrigeration system inside the low-temperature industrial refrigerator (group) also needs to pay attention to, once the air in the low-temperature industrial freezer (group) refrigeration system will reduce the cooling efficiency, this time can be several times after a few minutes after the shutdown The high pressure shut-off valve releases air, and it is also possible to properly fill some refrigerant according to the actual situation.
The refrigeration effect of the low-temperature industrial refrigerator (group) is closely related to the amount of refrigerant. Therefore, users should pay attention to the refrigeration effect in time and strive for better operation of the low-temperature industrial refrigerator (group).
関連推奨品
-
化学工業における工業用冷水機のデバッグ手順
1069化学企業で工業用ウォーターチラーの設置が完了した後、運転の初期段階で一定のデバッグを実施する必要がある。入念なデバッグを行うことで、初めて工業用ウォーターチラーに隠れたトラブルがないかどうかを突き止めることができるのだ。
詳細を見る -
低温チラーシステムにおけるアイスジャム現象
846The phenomenon of ice jam in low temperature chiller system is mainly due to the excessive water in the refrigeration system. With the continuous circulation of refrigerants, the water in the refrigeration system gradually concentrates at the outl...
詳細を見る -
冷凍加熱サーキュレータの動作原理解析
1142技術の絶え間ない発展に伴い、私たちの生活にはますます多くの冷凍機器が登場するようになった。例えば、冷凍・暖房用サーキュレーターなどだが、実はこれらは普通のものではなく、注目に値する冷凍機器なのだ。冷蔵・暖房用サーキュレーターは、実は普通のものではなく、注目すべき冷凍機器なのだ。
詳細を見る -
一般的な高温および低温の統合された機械弁の修理の詳細な説明
1414従来の高温・低温一体型機械弁はパッキンに代わるもので、パッキンの主な機能は、作動媒体が弁軸の軸方向に沿って漏れるのを防ぐことです。わずかな漏れの場合、...
詳細を見る