Parts Analysis of Low Temperature Chiller
について 低温チラー is a cooling water equipment which is widely used. So, when using it, you should first understand the principle of the cryogenic water chiller and its accessories, so as to run the cryogenic water chiller more efficiently.
について 低温チラー is a kind of water-cooled cooling equipment, which can provide certain constant temperature, constant current and constant pressure refrigeration equipment. It uses the water tank in the machine to inject appropriate amount of water, cooling water through the refrigeration system, and then pumps the cooling water into the equipment that needs to be cooled. The chilled water takes the heat away from the temperature rising water and reaches the water tank to achieve a cooling effect.
Generally speaking, the 低温チラー is a relatively economical equipment. Generally, refrigerant circulating system, electrical control system and water circulating system complement each other. It is composed of condenser, compressor, thermal expansion valve, evaporator, liquid storage, drying filter, refrigerant and so on.
In the use of the 低温チラー, the condenser can play a role of heat output. Once the high-pressure gas discharged from compressor operation enters the condenser, it can absorb its heat, and can also transfer other heat in the pipeline to the surrounding media.
Compressor is very important in the 低温チラー, which belongs to the core part. It can convert electrical energy into mechanical energy. Compression refrigerant is closely related to the operation of other parts.
In the 低温チラー, the thermal expansion valve regulates the flow rate and is also a throttle valve in refrigeration equipment. It can make the liquid refrigerant of high pressure and normal temperature reduce pressure through the throttle of the thermal expansion valve, and turn into low temperature and low pressure steam to enter the evaporator to gasify and absorb heat, so as to achieve the purpose of cooling.
Of course, the evaporator is also a heat exchanger which uses refrigerant evaporation to achieve the absorption of heat by the 低温チラー. In addition, in a relatively small 低温チラー, drying filters are also necessary to prevent some other substances from entering the refrigeration system!
So, before you use the 低温チラー, you should have a good look at it. After all, there are many knowledge points. You can see more about it.
関連推奨品
-
Low temperature industrial freezer fan coil wiring instructions
1112The electric two-way valve red line of the low-temperature industrial freezer is 220V hot wire (L) directly connected to the thermostat fire line interface, the blue line is zero line (N), the coil, the two-way valve, the thermostat is connected i...
詳細を見る -
High and low temperature hot and cold water cooling machine for battery motor test
1063LNEYA high and low temperature cold and heat integrated water cooler is used in battery thermal management of new energy electric vehicles. The following is the relevant principle applied in thermal management.The high and low temperature cold and...
詳細を見る -
Purchasing a special chiller for etching machine and precautions for operation
1077The special chiller for etching machine is used for testing of components, chips, etc. These industries are more supporting use, so what aspects should be paid attention to when choosing the chiller for etching machine drilling? What should I pay ...
詳細を見る -
Maintenance of vacuum pump for fully enclosed heating and cooling circulator
1127Each accessory in the fully enclosed heating and cooling circulator constitutes the entire refrigeration heating and temperature control system. The performance of the pump is also very important. How to make the maintenance of the pump? For the f...
詳細を見る