超低温フリーザーの安全な使用とメンテナンスのためのガイドライン
Cryopreservation of samples is very important in modern biological research.
Correct use of cryogenic freezers (hereinafter referred to as refrigerators):
1. It is necessary to understand the influence of environment on refrigerators.
2. Familiar with basic operation, maintenance and maintenance knowledge
3. Develop good habits
Let the refrigerator breathe freely;
Let the air around the refrigerator circulate freely.
Free at least 15 cm of space around the refrigerator and 30 cm of space at the top.
Items should not be stacked at the top of the refrigerator to avoid affecting the heat dissipation at the top.
Give the refrigerator a reliable environment
Try to keep the ambient temperature around the refrigerator between 15 and 32 degrees Celsius for a long time.
Consider the difference of energy consumption between winter and summer, and control the environmental temperature reasonably.
If the ambient temperature is too high for a long time, the compressor life will be damaged.
Refrigerator heat dissipation will lead to higher ambient temperature
Eliminate the influence factors of heat exchange in refrigerators:
Don’t put the refrigerator near the heat source
Don’t put the refrigerator in the vent
Reserve special circuit for refrigerators
Basic operation
Turn on: After plugging in the power plug, press the switch in the lower right corner of the back, “O” stands for turning off, and “I” stands for turning on.
If the equipment is inclined more than 45 degrees when it is moved, the equipment will be placed vertically for 24 hours before start-up!!!
Open the battery switch: Open the white door under the front and press the switch down to “I”
Battery function: When the power is off, it can supply power to the display board and provide sound and light alarm.
我々は 超低温冷凍庫メーカー.私達のプロダクトの何れかのモデルに興味がある場合は、お問い合わせは、自由にしてください a>を参照してください。
関連推奨品
-
フラッシュ高温・低温テストチラーのメンテナンスのポイント
972フラッシュ高温・低温テストチラーの購入者は日に日に増えている。購入後、耐用年数が大幅に短縮されたことに気づく人も多い。そのため、運転管理者やメンテナンス担当者は一定の専門的な知識を持っていなければなりません。
詳細を見る -
グリコールチラーと水冷式チラーの違いは何ですか?
1036生産時に発生する熱を十分に放散させるためには、グリコールチラーと冷凍機の両方を使用することができる。この2種類のチラーの基本的な違いは、凝固点と熱伝達能力の違いである。...
詳細を見る -
特殊環境用コンポーネント・テスター
1624With the continuous development of the semiconductor industry, component component testing has been widely used in components in the fields of industry, scientific research, pharmaceuticals, and chemical industry. At present, there are quite a few...
詳細を見る -
TCU-複数炉冷却加熱温度制御システムの購入
1294研究をしている研究者は、実験室での実験中、TCU-マルチリアクターが冷却・加熱温度制御システムや高温・低温一体型の機械に使われることが多いことを知っている。
詳細を見る